Procedure Text + Soal+jawaban Making Candles
Procedure Test + Soal+jawaban Making Candles
MAKING CANDLES
First of all, melt the wax. All wax has a flash point, so to prevent it from bursting into flames; you must melt it in a double boiler, with water at the bottom of the pan.
Then, prepare the mould with the wick. Thread the wick through the mould and make sure that you leave a good few centimeters sticking out of the hole in the bottom.
After that, add the scent. If you want a scented candle, add a few drops of essential oil to the melted wax. You can use any essential oil you like, as long as it doesn't contain water.
Next step, pour the wax into the mould. Try and tip the wax into the mould quickly, all in one go, to minimize spillage and air bubbles.
Then, release the bubbles and top it up. Releasing the air bubbles will eventually make the candle sink, so you will need to top it up with more melted wax.
Finally, remove it from the mould. After four or five hours, the candle can be taken out of its mould.
Your candle is now ready for display. Remember, you must always leave it for a day before lighting it.
1. What does paragraph one tell us about?
A. The steps in making candles.
B. The materials we need in making candles.
C. The goal of the text in making candles.
D. The way to make candles.
2. What should you do after melting the wax?
A. Pour the melting wax into the mould.
B. Remove the melting wax from the mould.
C. Prepare the mould with the wick.
D. Release the bubbles and top it up.
3. Where can you buy the materials for making candles?
A. At the handicraft shop.
B. At the super market.
C. At the stall.
D. At the craft shop.
4. “…, so to prevent it from bursting into flames you …”
The word “bursting” means …
A. exploding
B. melting
C. satisfying
D. becoming
Belum ada Komentar untuk "Procedure Text + Soal+jawaban Making Candles"
Posting Komentar